Siemens SIMATIC NET RUGGEDCOM MX5000 Installation Manual page 41

Modules
4.3 Installing/Removing Power Supply Modules
Removing a Power Supply Module
To remove a power module, do the following:
1.
2.
3.
Installing a Power Supply Module
To install a power module, do the following:
1.
32
Loosen the screws that secure the module to the chassis until the module can be
removed.
3
2
1
Screws
1
Power Supply
2
Chassis
3
Figure 4.6 Removing a Power Supply
Slide the module out of the chassis.
Install a new or blank module to prevent the ingress of dust and dirt.
If equipped, remove the existing module.
RUGGEDCOM MX5000
Installation Manual, 01/2021, C79000-G8976-1059-13