Download Print this page

Mounting The Device To A Rack - Siemens SIMATIC NET RUGGEDCOM MX5000 Installation Manual

Hide thumbs Also See for SIMATIC NET RUGGEDCOM MX5000:

Table of Contents

Forced airflow is not required. However, any increase in airflow will result in a

reduction of ambient temperature and improve the long-term reliability of all

equipment mounted in the rack space.

Note

For detailed dimensions of the device with mounting hardware installed, refer to

"Dimension Drawings (Page

2.3.1

Mounting the Device to a Rack

For installations, the RUGGEDCOM MX5000 can be equipped with adapters pre-

installed at the front or rear of the chassis. Additional adapters are provided to

further secure the device in high-vibration or seismically active locations.

RUGGEDCOM MX5000

Installation Manual, 01/2021, C79000-G8976-1059-13

2.3.1 Mounting the Device to a Rack

36)".

Installing the Device

Table of Contents

Do you have a question about the SIMATIC NET RUGGEDCOM MX5000 and is the answer not in the manual?