Installing The Drivers - Zoom PCMCIA V.90 User Manual

Installing the Drivers

For Windows 95/98: Put the faxmodem aside for now.
Follow the steps below.
For Windows NT 4.0: Turn to page 8 to first install the
modem and then follow the steps below:
1
Your computer should be turned on. Close any ap-
plications you have running.
Insert the CD-ROM disc that came with your fax-
modem into your CD-ROM drive. The CD-ROM disc
should auto-run after a few seconds and display an
installation screen.
If the CD does not auto-run:
•
Click on My Computer on your desktop; then
double-click on the icon for your CD-ROM drive.
• If the installation program doesn't start up right
away, double-click on setup.exe.
2
When the installation interface screen appears,
click on the Install Modem Drivers button. The in-
stallation program will run and automatically copy
driver files to your hard drive. Do not install any of
the other software at this time.
3
Windows NT 4.0 only:
A Select Components dialog box will display. Make
sure the Install new modem driver and compo-
nents choice is selected. Click Next. A Setup Com-
plete dialog box will display. Click Finish.
4
Shut down your computer.
5
For Windows 95/98: Follow the instructions for
Installing the Faxmodem Card below.
For Windows NT 4.0: After you've followed the in-
structions on page 8 for Installing the Faxmodem
Card and then installed the drivers following the in-
structions above, go to Verifying the Installation
on page 10.
Chapter 1: Setting Up Your Faxmodem 7