Chapter 1: Setting Up Your Faxmodem; Windows 95 And Windows 98; Windows Nt 4.0 - Zoom PCMCIA V.90 User Manual

Chapter 1:
Setting Up Your Faxmodem

Windows 95 and Windows 98

We have enhanced Windows' plug-and-play capability
and streamlined the installation of your modem by in-
cluding an InstallShield® software program. For Windows
95/98 computers, you must run this program before you
install your faxmodem.
This InstallShield® program installs driver files and sets
up your computer to recognize the new faxmodem. When
you restart your computer after installing the faxmodem,
your hard drive will already contain the files Windows
needs to complete the installation. Continue with the In-
stalling the Drivers section below.

Windows NT 4.0

For computers running Windows NT 4.0, we've also
streamlined the installation, but the sequence is differ-
ent. You must first install your new faxmodem, then run
the InstallShield program. To begin installing your new
PC Card faxmodem with Windows NT 4.0, please go to the
Installing the Faxmodem Card section on page 8.
6 User's Guide