Uninstalling Your Faxmodem - Zoom PCMCIA V.90 User Manual

Chapter 3: Troubleshooting. When you finish the test,
you can exit the software.
If you have installed fax software, you may be given an
opportunity to register the software with its publisher. If
there is a registration form, follow the steps for registering
the software. If you are unable to transmit the registra-
tion form, make sure that the fax software is configured
for the same COM port specified in the card management
software. Then try transmitting the form again. When you
finish the test, you can exit the software.

Uninstalling Your Faxmodem

If you ever want to uninstall your faxmodem, follow these
steps:
For Windows 95/98:
Click Start | Run. Type ltremove and click OK.
For Windows NT:
Follow the same steps listed on page 7 until the Select
Components dialog box displays. Select Remove exist-
ing modem driver and components. Click Next. The
Modem Properties box will display. Select the Zoom 56K
Modem and click Remove.
12 User's Guide