Your Online Service Reports A Connect Speed That; You Cannot Hear The Connection Through The Speaker - Zoom PCMCIA V.90 User Manual

LAPM only
MNP4 only
"Normal" operation (The faxmo-
dem will communicate without
any error correction or data
compression, but will retain
speed buffering and auto-speed
negotiation. It should not be
confused with the "standard"
configuration.
Auto-answer
Problem: Your online service reports a connect speed
that doesn't match your modem's speed.
Solution: First make sure the maximum speed setting is
as high as your computer system allows: In
Control Panel, open Modems and click on
Properties. Set the Maximum speed setting to
the highest setting.
If you have set the maximum speed to its
highest setting and are seeing a connect speed
that is faster than your modem's published
speed, your software is reporting the internal,
computer-to-faxmodem speed. To get your on-
line service software to report the actual con-
nect speed, add W2 to the end of the initiali-
zation string, or to the dial prefix just before
the D, as in these examples:
Initialization string: AT&F&C1&D2W2
Dial prefix: ATW2D
Consult your online service's documentation
for details on initialization strings and dial
prefixes. Actual connect speeds depend on
your modem's speed, the equipment you're
connecting to, and phone line conditions.
Problem: You cannot hear the connection through
the speaker.
Solution: Make sure the speaker is enabled in Windows.
24
AT \N4
AT \N5 %C0
AT \N0
AT S0=1
User's Guide