MARUTI SUZUKI Maruti 800 Service Manual page 79

1B-28 AIR CONDITIONING (OPTIONAL)
1) Pry out oil ring (1) by using like a screwdriver, and then remove
oil felt (2).
2) Remove key (1) from shaft by using a hammer and punch.
3) Remove circlip (1) by using special tool (E).
Special Tool
(E): 09900-06108
4) Apply compressor oil to inner bore.
5) Remove lip seal by using special tool (F). The following explains
this removal procedure.
a. Fit special tool (F) into the clutch installation boss.
Special Tool
(F): 09990-48220