Making Hot Water - Gorenje ESCM12MBK Instruction Manual

4. Then, connect the appliance to power supply. Make sure the steam control knob is in the OFF
position.
5. Press the power switch " " once. The power indicator turns on and the coffee indicator blinks. When
preheating is complete, the coffee indicator is constantly lit. Press the coffee switch. When water
starts to flow out of the appliance, close the pump immediately. The purpose of this step is to pump
the water from the tank into the housing.
6. When the lamp on coffee switch is illuminated, press the coffee switch again. Hot water will start
flowing out of the appliance. When the lamp on the coffee switch is extinguished, close the pump.
The preheating process is complete.
Make espresso
1. Remove the funnel by turning it clockwise. Add ground coffee into the steel mesh, using a measuring
spoon. A spoon of ground coffee can make about one cup of top-grade coffee. Press the ground
coffee powder tightly with the tamper.
2. Set the steel mesh into the metal funnel, making sure the tube on the funnel aligns with the groove in
the appliance. Then, insert the funnel into the appliance from the "Insert" position, and fix it into the
coffee maker firmly by turning it anticlockwise until it is in the "Lock" position.
3. Pour hot water into the cup. When the cup is warmed up, discard the water from the cup and dry it.
Then, place the hot cup on the removable shelf.
4. At this point, the lamp in the coffee switch will be illuminated. If it is extinguished, wait for a moment.
Once the lamp in it is illuminated, press the coffee switch. Wait for a moment; there will be coffee
flowing out. When the required amount of coffee is in the cup, press the coffee switch again and the
water pump will stop working.
WARNING:
1. Do not leave the coffee maker unattended while making coffee, as is sometimes has to be operated
manually!
2. When you finish making the coffee, you can remove the metal funnel by turning it clockwise. Discard
the coffee residue from the steel mesh.
3. Let the funnel and the mesh cool down completely, then rinse them under running water.
4. Operating time for brewing a single cup of coffee is up to 60 seconds. If operating time exceeds 60
seconds, the water pump will stop working. Operating/brewing time can be adjusted as follows. When
the appliance is in standby mode, press and hold the coffee switch for 3 seconds. The coffee
indicator blinks. Then, press the coffee switch again within 5 seconds. The water pump starts to
operate. After the desired amount of time, press the coffee switch again and the water pump will stop
working. The setting is finished. Operating time can be set in the range from 15 to 60 seconds.

Making hot water

When preheating is complete, the coffee indicator lights up and it is lit constantly. Then, press the coffee
switch and the water pump starts to pump water. Turn the knob to "Hot water", and hot water will flow out
of the steam pipe. To stop making hot water, press the coffee switch again. Hot water is used for warming
cups, making tea or cooling down the appliance.
To adjust the operating time for heating up water, please refer to the section "Make ESPRESSO..
Make cappuccino/frothed milk
For a cup of cappuccino, top up a cup of espresso with frothed milk.
Method:
1. First, prepare espresso as described in the section "MAKE ESPRESSO", , using a sufficiently large
container (cup). Make sure the steam control knob is in the "0" position.
2. Press the steam switch selector. The lamp in the coffee switch will be illuminated. Wait until the
indicator in the steam switch selector is illuminated.
Note: During operation, the indicator in the steam selector will cycle on and off as the desired
temperature is maintained.
13