Heat Sink - HP Chromebook 11MK G9 Education Edition Maintenance And Service Manual

10. Slide the system board (3) up and to the left at an angle to remove it.
NOTE:
The I/O bracket is available using spare part number M45808-001.
Reverse this procedure to install the system board.

Heat sink

To remove the heat sink, use these procedures and illustrations.
Table 5-7 Heat sink descriptions and part numbers
Description
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly
2. Remove the top cover/keyboard
3. Disconnect the battery cable from the heat sink
4. Remove the system board
Remove the heat sink:
1. Turn the system board upside down with the front toward you.
2. Remove the two Phillips M2.0 × 2.0 broad head screws (1) that secure the heat sink to the system board.
ENWW
When removing the system board, make note of the location of the I/O bracket (4).
(Top cover/keyboard on page
(System board on page
(Preparation for disassembly on page
28).
(Speakers on page
37).
28).
33).
Component replacement procedures
Spare part
number
M44241-001
39