Syncing Datadisk To A Sequencer - Alesis Data Disk Reference Manual

SECTION 6
The same sequence can be played back again by pressing the
button, or another sequence or sysex file can be selected
DO/YES
by pressing the
If, while playing back a sequence, you decide that you wish to
abort the operation, press either of the
display will briefly read:
The display will then return to the Send File MIDI Sequence page.
If a MIDI Sequence is aborted while being sent or if a MIDI Stop
command is received while the file is being sent, the DataDisk will
automatically send the following:
1) MIDI Stop Command
2) Controller #64 "sustain pedal" OFF (all 16 channels)
3) Note-offs for all playing notes (all 16 channels)
NOTE: The DataDisk will not merge MIDI data being sent with data being
received when the MIDI Echo function is enabled.
MONITORING DATA BEING SENT FROM THE DATADISK TO ANOTHER
SEQUENCER

SYNCING DATADISK TO A SEQUENCER

It is possible to have the DataDisk play along in sync with an
external sequencer or drum machine.
1) Press the
buttons.
SCROLL
OPERATION
ABORTED
Out
Out
IN
Midi Echo
On
button three times. The display will read:
MIDI
buttons.
SCROLL
Note that the MMT-8's
countdown should be set to 00
and its MIDI Echo set to ON.
IN
48
The