To Receive Multiple Files - Alesis Data Disk Reference Manual

(check your manual for the correct procedure). When
system exclusive data is detected, the display will read
the following:
RECEIVING XXXXXX
YYYYYY
In this display, XXXXXX is an abbreviation of the manu-
facturer's name of the device sending the data, and
YYYYYY is an abbreviation of the model name. If the
data received is a MIDI sample dump, the manufacturer
and product name will be displayed as "Sample Dump".
After all the data is received (when no MIDI data re-
ceived for 1/2 second), the display will change to the
following:
STORED AS XXXXX
YYYYYY ZZZZZZZZ
In this display, XXXXXX is an abbreviation of the manu-
facturer's name of the device sending the data, YYYYYY
is an abbreviation of the model name, and ZZZZZZZZ is
an automatically assigned file number.
If additional sysex messages are now received, the dis-
play will automatically revert to the "RECEIVING" mes-
sage and proceed to store the new sysex into a new file.
This allows several sysex files to be saved to multiple
disk files without having to re-select the RECV function.
3) Exit the function by pressing another function button.
Multiple system exclusive files from multiple products can be re-
ceived and stored as a single file by using a Receive Multiple Files
page. In this mode,
messages as desired (up to the limit of available disk space), and
save them all into one disk file. To enter this function, do the fol-
lowing:
1) Press the
display will change to the following:

TO RECEIVE MULTIPLE FILES

is able to receive as many sysex
DATADISK
button on the front panel twice. The
RECEIVE
29
REAL TIME MIDI SEQUENCING