Target Unit Not Responding - Alesis Data Disk Reference Manual

SECTION 4
This display occurs when the Data Disk sends a file to an instru-
ment that requires handshaking and receives no handshaking re-
sponse.
PLEASE NOTE: There are safeguards to prevent against tricking
the by swapping disks before initiating an operation. For
DATADISK
example:
1) With disk A in the drive, press the
2) Eject disk A: insert disk B.
3) When you press
DATADISK
from the original and will just load the new disk's
directory and re-enter the Send function.
CAUTION: If the user tries to trick
will not be able to load or read back the data. You're
DATADISK
safe as long as you don't swap disks while in Receive mode without
pressing the Receive button after inserting a new disk!
TARGET UNIT NOT
RESPONDING
DO/YES
will realize that the disk in the drive is different
DATADISK
button.
SEND
to initiate an operation,
in Receive mode,
26
TARGET UNIT NOT
RESPONDING