Receive Midi Data Function; Recv One Sysex; Recv Mult Sysex; Send Midi Data Functions - Alesis Data Disk Reference Manual

The RECEIVE MIDI Data Function is used to store MIDI system ex-
clusive data received from a synthesizer, sequencer, or effects
processor to a floppy disk inside the
pages to this function which are:
Receive One Sysex (the display will read "RECV ONE SYSEX:") is
used to receive a single system exclusive file over MIDI. One sy-
sex (system exclusive) file may be a single program or a complete
dump from a synthesizer, sampler, or sequencer.
In this mode, system exclusive data from multiple products is re-
ceived by
DATADISK
and easy to locate the file and load the data back into the multiple
synthesizers or devices at a later time. The display will read

"RECV MULT SYSEX".

The SEND MIDI Data Function is used to send MIDI system exclu-
sive files to a synthesizer, sequencer, or effects processor. There
are two pages to this function which are:
This page is used to send a single system exclusive file over MIDI,
where XXXXXX is the manufacturers name of the file stored on
disk, YYYYYY is the product model name, and ZZZZZZZZ is the
name of the file to send.
or
SCROLL UP SCROLL DOWN
played. The files are viewed alphabetically.
In this page, all files stored on the disk will be sent over MIDI to
their respective instruments. This way, an entire setup of a number
of instruments, sequencers, samplers, and processors can quickly
be sent from just this one page.

RECEIVE MIDI DATA FUNCTION

DATADISK
and stored as a single file. This makes it fast

SEND MIDI DATA FUNCTIONS

Files are selected by pressing the
buttons until the desired file is dis-
. There are two
SEND FILE XXXXXX
17
DATADISK FUNCTIONS
RECV ONE
SYSEX
RECV MULT
SYSEX
YYYYYY ZZZZZZZZ
SEND ALL
FILES