SECTION 6
4c) Repeat steps 4a and 4b until all characters are
5) When the file has been renamed, complete the operation
by pressing the
the beginning of the Rename function, allowing other
files to be selected to be renamed, if desired.
6) Exit the Rename function by pressing another function
button.
PLEASE NOTE:
—
To remain in the Name function without storing the newly edited
name, press the
name.
—
If a file with the same name already exists, the following mes-
sage will temporarily appear and the newly edited name will not
be stored to disk.
will then return to the beginning of the Rename
DATADISK
function.
1) Press the
will read:
In this display, XXXXXX is an abbreviation of the manu-
facturer's name of the device sending the data, YYYYYY
is an abbreviation of the model name, and ZZZZZZZZ is
the name of the file to send.
2) Select the desired file by pressing the
SCROLL DOWN
(files are viewed alphabetically).
RENAME XXXXXX
YYYYYY ZZZZZZZZ?
changed as desired.
button. This brings us back to
DO/YES
button again. This will recall the original
NAME
DUPLICATE
FILE NAME
button on the front panel. The display
SEND
SEND FILE XXXXXX
YYYYYY ZZZZZZZZ?
buttons until the desired file is displayed
TO SEND A FILE
SCROLL UP
34
or