Disk Status And Info Messages; No Disk In Drive; Disk Unformatted - Alesis Data Disk Reference Manual

SECTION 4
character set key until the desired character is displayed. These
steps are repeated until all characters are changed as desired.
Pressing the button stores the new name.
DO/YES

DISK STATUS AND INFO MESSAGES

is an intelligent device and its display will either prompt
DATADISK
the user to make decisions, or describe the current disk status.
The LCD will also display a variety of status and info messages
telling the user why a particular function cannot be initiated.
When any of these error messages occur, the user must correct
the source of the problem and re-select the function. The user can
also leave the function at any time by selecting another section or
function.
NO DISK IN
DRIVE
The following message will appear if a disk is not inserted in the
disk drive when any disk function is selected or if a disk
DATADISK
was ejected during an operation:
NO DISK
IN DRIVE
If the "No Disk" message appears, the user must re-insert a disk
and re-select a function to continue operation.
DISK
UNFORMATTED
The following message will appear if the disk is not properly for-
matted:
DISK
UNFORMATTED
or
DISK UNREADABLE
The user must now insert a formatted disk or format the disk in the
drive by selecting the FORMAT DISK function.
22