To Backup An Entire Disk - Alesis Data Disk Reference Manual

PLEASE NOTE:
—
If the backup disk contains a file with same name as the file se-
lected to be backed up, the display will prompt:
Pressing the
DO/YES
backup disk, before starting backup.
function will exit the backup.
—
Backup can be aborted at any time by pressing any other func-
tion button.
1) Press the
BACKUP
will read:
In this display, XXXXXX is an abbreviation of the manu-
facturer's name of the device sending the data, YYYYYY
is an abbreviation of the model name, and ZZZZZZZZ is
the name of the file to be backed up.
2) Press the
BACKUP
read:
3) Press the
DO/YES
XX is the number of times that the source (the disk cur-
rently in
DATADISK
you will backup your file to) must be inserted and re-
moved from the disk drive.
4) Follow steps 4 through 9 as in "To Backup A File".
REPLACE FILE
WITH SAME NAME?
button will proceed to delete the file on the

TO BACKUP AN ENTIRE DISK

button on the front panel. The display
BACKUP XXXXXX
YYYYYY ZZZZZZZZ?
button a second time. The display will
BACKUP ALL
FILES TO DISK?
button. The display will then read:
XX DISK SWAPS
REQUIRED. OK?
) and destination disks (the one that
Pressing any other
43
REAL TIME MIDI SEQUENCING