E Group Buttons Enable/Disable; F Copy Tape Location Mode - Alesis BRC Reference Manual

This function allows you to either enable or disable the track group
buttons from being able to store and recall groups of record-enabled
tracks. This is useful when you don't want to worry about accidentally
pressing one of the group buttons and losing the current record-
enabled tracks. By disabling the groups, you can forget about it. When
the track group buttons have been disabled, pressing any of the group
buttons will display the following message:
Group Buttons
To enable or disable the track group buttons:
1. Press the MIDI/UTIL button five times (if one of the MIDI/UTIL
pages was already being displayed, press the MIDI/UTIL button
repeatedly until the Group Buttons function is reached);
The display should look like this:
5: Group Buttons
2. Use the UP/DOWN buttons to either enable or disable the track
group buttons.

5.3F Copy Tape Location Mode

This function determines how the COPY TAPE LOCATION button
will operate. In N o r m a l mode, pressing the COPY TAPE LOCATION
button will copy the current tape location into the currently displayed
locate point (00–22) or Song Start (01–20). In Manual mode, the
current tape location is instead copied to the manual locate point
(Locate 00) and the display automatically changes to show you the
manual locate point. Using Manual mode will ensure that you never
accidentally write over a locate point that you wanted to keep.
To set the Copy Tape Location mode:
1. Press the MIDI/UTIL button six times (if one of the MIDI/UTIL
pages was already being displayed, press the MIDI/UTIL button
repeatedly until the Copy Tape Location function is reached);
The display should look like this:
6: Copy Tape Loc
Disabled
E nabled
N ormal
85