3: Tape x x Stat
No tape present
...or
3: Tape x x Stat
Not responding
...where XX is a tape machine number from 01 to 16.
2. Use the Numeric Keypad or the UP/DOWN buttons to select a
tape machine number 01 through 16.
Note: You will only be able to select tape numbers corresponding to
the number of ADATs you have connected to the BRC.
The bottom line of the display will either indicate format status,
write-protect status, or tape presence status. Tape status will be shown
for connected ADATs only.
5.3D LCD Display Contrast
This function lets you adjust the contrast of the lower LCD display.
The best setting will depend on the position of the BRC, and whether
or not it has been rack-mounted.
To adjust the LCD display contrast:
1. Press the MIDI/UTIL button four times (if one of the MIDI/UTIL
pages was already being displayed, press the MIDI/UTIL button
repeatedly until the Display Contrast function is reached);
The display should look like this:
4: LCD Display
...where x is a number from 0 to 9.
2. Use the Numeric Keypad or the UP/DOWN buttons to adjust the
contrast.
5.3E Group Buttons Enable/Disable
Contrast: x
84