Adjusting The Flame; Visual Characteristics Gas Flames; Switching Off - Miele KM3464 Operating And Installation Instructions

Operation

Adjusting the flame

The burners can be variably adjusted
between the lowest and highest flame
settings.
Because the edges of the flame are
much hotter than its center, the flame
tips should stay beneath the bottom of
the cookware. Flame tips which ex-
tend beyond the sides of the cook-
ware emit unnecessary heat into the
room and can also damage cookware
handles, which increases the risk of
injury.
 Adjust the flame so that it never ex-
tends up the sides of the cookware.
Wok burner
Depending on the knob design, there
may be a stopper at the 6 o'clock posi-
tion to prevent you turning the knob to
the high or low setting unintentionally.
 Press the knob down lightly to move
past this stopper.
28

Visual characteristics gas flames

Switching off

 Turn the control knob clockwise to
the  position.
This stops the flow of gas and the flame
goes out.
Yellow flames
Contact the Miele
Service Depart-
ment.
Yellow tips on
outer cones
Normal for
propane gas
Soft blue flames
yellow colour is
only allowed at
the tip of the inner
cone
Normal for natural
gas