Turning The Appliance On - Miele KM3464 Operating And Installation Instructions

Turning the appliance on

 Press the knob lightly and turn it
counter-clockwise to the large flame
symbol.
 Then press it down firmly to open the
gas supply and let it go.
The ignition electrode "clicks" and ig-
nites the gas.
When a knob is activated, a spark is
developed automatically on all burn-
ers. This is normal and does not indi-
cate a fault.
 If the burner does not ignite, turn the
knob to the  position. Ventilate the
room or wait for at least 1 minute be-
fore trying again.
 If the burner does not ignite the sec-
ond time, turn the knob back to the 
position and see "Frequently asked
questions".
Brief re-ignition may occur during
switch-on (1–2 x clicks), e.g., if there is
a draft.
Switching on during a power outage
In case of a power outage, the flame
can be ignited manually.
 Press in the relevant control knob and
turn it counterclockwise to the large
flame symbol.
 Hold the control knob pressed down
and light the gas at the burner with a
match.
 Keep the control knob pressed down
for a further 5–10 seconds and then
release it.
Operation
27