Gas Connection - Miele KM3464 Operating And Installation Instructions

Gas connection


Connection to the gas supply
may only be performed by a duly au-
thorized technician. This technician is
responsible for proper function at the
installation site.
In Massachusetts, the gas connec-
tion may be performed only by a cer-
tified gas installer.
The appliance must be connected
with its own shut-off valve.
The shut-off valve must be accessi-
ble and visible, after the opening of a
cabinet door, if necessary.
The gas connection can be to natural
gas or propane gas according to the
model.
Ask your gas company what kind of
gas is used and compare it with the
specifications on the data plate.
The appliance is not connected to an
exhaust vent.
During the setup and connection of
the appliance, observe the applica-
ble installation conditions, especially
suitable ventilation measures.
Arrange the gas connections in such
a way that they are not heated and
damaged by the operation of the ap-
pliance.
In particular, make sure that the gas
hose lines and connection fittings on
the applinace do not come into con-
tact with hot exhaust gases
The gas hose and power cord could
be damaged by hot spots on the ap-
pliance.
Make sure that the gas hose and
power cord do not come into contact
with hot spots on the appliance.
Flexible connection lines can be
damaged by incorrect routing.
Attach flexible connecting lines in
such a way so that they do not come
into contact with any moving kitchen
parts (e.g., a drawer) and are not ex-
posed to mechanical stress.
Disconnect the appliance and the
shut-off valve from the gas supply
before performing a gas pressure
test at a pressure of more than ½ psi
(3.5 kPA). Close the shut-off valve of
the gas supply before performing a
gas pressure test at a pressure of
less than or equal to ½ psi (3.5 kPA).
Incorrectly sealed gas lines can lead
to a gas leak and thus to an explo-
sion.
Seal all gas lines with a suitable
thread sealant.
Seal tightness tests on the appliance
must be performed according to
manufacturer specifications.
Installation
47