Advertisement
Reset button
Handling
Connecting with the web interface for configuration
Smart Infrastructure
To reset the WLAN stick to its factory settings, press and hold the reset button for
3 seconds while the WLAN stick is active.
A red flashing LED signals the reset process.
Connect the WLAN stick to a USB port. Wait until the LED flashes green. The
connection between the terminal unit (notebook, cell phone, etc.) and the WLAN
network (SSID „Siemens-WLAN-Stick") is established.
Relevant data for commissioning:
SSID: Siemens-WLAN-Stick
Password for the terminal unit: SIBPAdmin
DNS name: siemens.wlanstick
Siemens AG recommends changing the password as part of the commissioning
process.
Changes to all settings can be made via the web interface as required.
The IP address is issued automatically via DHCP.
The default IP address of the WLAN stick is 10.123.45.1.
The WLAN stick has an integrated DNS server and can be reached under the name
"siemens.wlanstick" regardless of its IP address.
The following URLs are available for the web interface to configure the WLAN stick:
http://10.123.45.1:8080
http://siemens.wlanstick:8080
https://10.123.45.1:441
https://siemens.wlanstick:441
7/11
CC1N7219en
10/28/2020
Advertisement
