using Ethernet • chapter 9
To quit FTP server mode
Once your transfers are complete, you must leave
FTP server mode in order to resume normal
recording and playback from the ADAT HD24.
1. Make sure that all downloads are complete and
all users have logged off the system.
The ADAT's display should read
FTP Server Ready
2. Press the
transport key on the front panel.
STOP
The ADAT's display will show
Disable FTP?
3. Press the
(L) cursor key. The unit will
YES
return to normal operation, and inquiries to the
FTP address will go unanswered.
88
Y /N
ADAT HD24 Reference Manual