Page 1
RMD R M20 P FOR THE ECORDING IRST M20 O PPLIES TO 1998 A LESIS EMOTE ISPLAY ROFESSIONAL YSTEM ’ WNER ANUAL 1.00 DITION ERSION PERATING OFTWARE LESIS ORPORATION ETER IGITAL 1.10 ERSION...
RMD R This document covers only those aspects unique to the RMD and should be inserted into the binder with the M20 manual. The RMD is a remote meter display designed exclusively for the ADAT-M20. It provides 32 channels of peak metering for up to four M20s. It will duplicate the meter ballistics of each M20’s front panel meter display settings.
RMD, Appendix R MPORTANT AFETY OTICES AFETY SYMBOLS USED IN THIS PRODUCT This symbol alerts the user that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol warns the user of uninsulated voltage within the unit that can cause dangerous electric shocks.
1.00 ANUAL IGITAL PPARATUS AUSING QUIPMENT ONFORMITY Alesis Corporation 1633 26th Street Santa Monica, CA 90404 Meter Display for Digital Multitrack Recorder 89/336/EEC; 73/23/EEC IEC 950 (1991) Second Edition, Amendments No. 1 (1992), 2 (1993), 3 (1995), and 4 (1996);...
RMD, Appendix R July, 1998 ONNECTING THE OWER The RMD works with any AC voltage from 90 to 250 volts, 50 to 60 Hz. This eliminates the need for transformers or voltage switches. The RMD ships with an IEC-spec power cord for the country to which the RMD was shipped.
Page 7
1. Connect one end of a control cable to the REMOTE connector on the CADI, and connect the other end to the connector labeled “CADI” on the RMD. Communication between the CADI and the M20(s) happens via the RMD connection to the first (ID 1/Master) M20 using the MACHINE 1 connector.
“benchmark” tape (see section 4.11 of the M20 manual). See Section 13.20 of the M20 Manual for more information about the error rate counter, and contact your Alesis dealer for information about tape care, head maintenance and cleaning.
M20. If a “B” indicator lights, immediately look at the display of the M20 itself for an error message. Write down the error code and refer to Alesis Product Support for more information. Some less serious M20 system error messages are displayed momentarily.