Alesis ADAT-HD24 Reference Manual page 60

Cutting entire tracks
Instead of cutting between the Edit Start and Edit
End points, it is possible to cut the entire track or
tracks selected for editing.
1. Press and hold the
the Track Record Enable button of the tracks
you want to cut.
A box will appear in the Meter Bridge around the
meters of the selected tracks.
2. Press . The display will read:
CUT
Cut Selected
Region(s)?
<
3. Press the
(CURSOR LEFT)
cursor under the word "Regions" in the display.
4. Press the (L) (up) button. The display will
YES
now read:
Cut Selected
T rack(s)?
>
5. Press the
(CURSOR RIGHT)
cursor under the "Y/N" in the display.
6. Press the (L) button to confirm the cut. The
YES
display will read:
Cut Track(s)
Are You Sure? Y /N
5. Press the
Y E S
confirm the operation.
6. You will see a progress bar while the audio is
being copied, then the display will read:
Track Cut
Complete
ADAT HD24 Reference Manual
button, then press
TRACK EDIT
Y /N
button to place the
Y/N
button to place the
(L) button one more time to
To copy entire tracks:
Follow the procedure for cutting tracks, but press
the button instead of the
COPY
chapter 6 • editing
button.
CUT
59