Alesis ADAT-HD24 Reference Manual page 33

basic recording and playback • chapter 3
To select a Song:
1. On power-up, the ADAT HD24 will mount a
drive and automatically select the last song you
were using. If the display looks something like
this:
S0 1 :"Song Name "
00:00:00:00
it is already in Song Select mode. If not, press
.
SONG SEL
2. Press the (L) or
YES
through the available Songs. A maximum of 64
songs per disk are possible; however, only
Songs that have already been created using the
button will be displayed.
NEW SONG
If the transport is playing when a new song is
selected, the transport will stop before changing
songs.
If there are no songs on the disk (if all Songs are
deleted through the use of the
the following message will be displayed when the
button is pressed:
SONG SEL
No Songs On Disk
(Press NEW SONG)
32
24t
(M) buttons to scroll
N O
button),
DEL SONG
To initialize a new Song:
1. Press the
NEW SONG
the display shown below:
Create New Song?
(Press Y /N)
If the transport is playing, it will continue
playing until the
YES
(M) button is pressed, the screen will revert to
NO
whatever it was previously displaying.
2. Press the (L) button to create a new song
YES
entry on the currently-selected drive. The
following message will be displayed:
SampleRate?48. 0 k
(Press New Song)
3. Press the (L) or
YES
through the possible sample rates: 44.1k,
48.0k 88.2k, and 96.0kHz.
Note that if 88.2 or 96.0k are selected, the Song
will be forced to default to optical input if there is
no 96kHz-compatible ADC and DAC PCB
Chapter 9: High Sample Rate Operation
installed. See
4. Press
NEW SONG
sample rate. This will bring up the track
configuration screen:
# of Tracks?
(Press New Song)
5. Press (L) or
YES NO
possible configurations: 2, 6, 8, 16, and 24.
Once the appropriate track width has been
chosen, pressing
NEW SONG
complete the song creation, and will bring up
the Song Select screen, as shown below:
SXX:"Song Name "
00:00:00:00
ADAT HD24 Reference Manual
button once to bring up
(L) button is pressed. If the
(M) button to scroll
NO
to choose the displayed
2 4
(M) to scroll through the
once more will
XXt
.