Other Functions - Dimplex Q-Rad Series Instruction Manual

Continuous Heat Modes
A Continuous Heat mode is e ectively a constant Heating On period. The Heater will remain in a Continuous Heat
mode indefi nitely until the mode is changed by the User.
Available Continuous Heat Modes
Each continuous heat profi le ships with a default Target Temperature value.
• Manual
• Default 21°C
• Can be changed from the Home Screen to any value within the range 19-30°C
• Eco
• Default 18°C
• Eco mode temperature can be set in the range 8-18°C
• Frost Protection
• Default 7°C
• Not User Defi nable

Other Functions

These functions modify the normal behaviour of the heater. They don't switch the Heater out of a Timer or Continuous
Heat Mode, but can override/delay those operations, or restrict access to them.
The 'Boost' Function
Boost can be activated at any time, when the product is set to any Timer or Continuous heat mode; even if Advance
is active This mode will provide a temporary 'Boost' of heat. For settings, see Boost settings on page 20.
Boost Mode can be activated from the Home Screen by pressing Menu to access the Main Menu, then pressing
Enter to select 'Boost'.
15
Modes
ADVANCE
Timer Mode
MENU
Manual
BACK
Eco Mode
ENTER
Frost Protect
Manual
ADVANCE
21 °
MENU
C
BACK
ENTER
Heating ON