Maintenance - Dimplex Q-Rad Series Instruction Manual

Maintenance

IMPORTANT:
Before replacing the battery ensure the heater is isolated from the electricity supply.
This product is fi tted with a replaceable battery in the controls.
To replace the battery, follow the steps below, shown in Fig. 6:
1. Unhinge the heater from the wall using the clips shown in Fig. 3 and locate
the battery module.
2. Slide the catch (1) and pull module from the controls (2).
3. Remove the coin cell battery and replace.
4. Slide module back in place, ensuring clip is engaged.
NOTE:
Battery should be disposed of in an appropriate manner
3
4
Fig. 6
Battery
positive
side up
24