Table of Contents
Advertisement
Control Functions
The heater controls can be easily adjusted by using the six buttons on the User Interface.
The Display Screen shows the options available at each stage of adjustment.
1
Menu - displays the main options list;
2
- Date/Time - Set the date and time.
- Mode - Set the mode of operation.
- Options - Temperature units, daylight savings time, lock settings and service information.
Back returns to the previous programming stage.
3
The
and
buttons are used to navigate through the menus and alter setting values.
4
The
and
buttons are also used to adjust the required room temperature on the main
screen. The screen colour changes based on the temperature selected, showing deep blue
through to bright red.
Enter is used within the menu options to confirm settings. On the main screen pressing
5
Enter will display the enabled features.
The timed periods during which the heater is providing heat are defined as 'Comfort On'
(this is displayed at the bottom of the screen).
Outside of heating periods the heater will not deliver heat and these periods are called
'Comfort Off'.
While constant heat modes are active, the mode of operation is displayed at the bottom
of the screen e.g. 'Manual'.
The Advance button overrides the heating settings and changes the operational state of
6
the heater. If a timer mode is selected, pressing Advance will cause the heater to remain
on until the next Comfort Off period is due, or off until the next Comfort On period is due.
If the heater is in a constant mode of operation, Advance can be used to switch the
appliance on and off.
Advance is also used to enter Boost mode. Boost mode delivers heat for between one
and four hours if the appliance is in a Timer Mode.
If Runback is enabled and the appliance is in Standby mode, the Advance button is used
to enter a timed Runback heating period.
11
Advertisement
Table of Contents
