Husqvarna K4000 Workshop Manual page 42

3. Put the front guard.
4. Put the pulley wheel.
5. Put the rear belt guard.
42 - Repair and servicing
6.11.3 Bearing
6.11.3.1 To remove the bearing Cut-n-Break
To remove the bearing, use Husqvarna wrench. See
Servicing tools overview on page 12
1. Remove the belt guard.
2. Put it in a vice.
3. Remove the bearing cage with the Husqvarna
wrench
474 - 002 - 27.06.2018