Table of Contents
Advertisement
Replacing the battery pack
The battery compartment is located on the back of the unit, as shown in
Figure
8.
Figure 8 Back of SmartClass VDSL Services Tester
The following procedure describes how to replace the battery pack.
To replace the battery pack
1 Turn the power off.
CAUTION: INSTRUMENT DAMAGE
Failure to turn the power off before removing the batteries from the VDSL
Services Tester could damage internal components and/or corrupt the soft-
ware. Always power down the unit before removing the batteries.
2 Remove the battery compartment door by pressing down and pushing
toward the bottom end.
3 Replace the battery pack.
4 Replace the battery compartment door.
Replacing the batteries is complete.
SmartClass VDSL Tester User's Guide
Chapter 6 Maintaining the Batteries
Replacing the battery pack
Battery compartment
25
Advertisement
Table of Contents
