Power Over Ethernet Specifications - Alcatel-Lucent OmniSwitch 6850-48 Hardware User's Manual

Installing and Managing Power over Ethernet (PoE)

Power over Ethernet Specifications

The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
"OmniSwitch 6850 Series Chassis and Hardware Components."
IEEE Standards supported
Default PoE administrative status
Default PoE operational status
OmniSwitch 6850 Series platforms supporting PoE
Cable distances supported
Total number of PoE-capable per switch
Default amount of inline power available for each port
Range of inline power allowed for each port
PoE Current draw
Default amount of PoE power per slot
Range of PoE power per slot
OmniSwitch 6850 Series Hardware Users Guide
IEEE 802.3af DTE Power via MDI
Enabled
Disabled (PoE must be activated on a switch-
by-switch basis via the
mand.)
OmniSwitch 6850-P24,OmniSwitch 6850-
P24L, OmniSwitch 6850-P24X, OmniSwitch
6850-P48, OmniSwitch 6850-P48L, and
OmniSwitch 6850-P48X
100 meters (approx.)
48
15400 milliwatts
3000–18000 milliwatts
Approximately 4.3 Amps
Approximately 390 Watts when 510w power-
supply is used and 240 Watts when 360w is
used
360W power supply - 37W to 240W
510W power supply - or 37W to 390W
September 2009
Power over Ethernet Specifications
Chapter 2,
lanpower start com-
page 3-3