Managing Power over Ethernet (PoE)
Power over Ethernet Specifications
The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
"OmniSwitch 6350 Chassis and Hardware Components."
IEEE Standards supported
Default PoE administrative status
Default PoE operational status
Models supporting PoE
Cable distances supported
PoE-capable ports per switch
Default amount of inline power available
Range of inline power allowed
PoE Power Available
OmniSwitch 6350 Hardware Users Guide
IEEE 802.3at
Enabled
Disabled (PoE must be activated on a switch-
by-switch basis via the
command.)
OS6350-P24, OS6350-P48
100 meters (approx.)
24 (OS6350-P24)
48 (OS6350-P48)
31000 milliwatts
3000 - 31000 milliwatts
OmniSwitch 6350-P24: ~ 380W
OmniSwitch 6350-P48: ~ 780W
September 2015
Power over Ethernet Specifications
Chapter 3,
lanpower start
page 6-3