Installing Rip Software; Obtaining Color Profiles - MIMAKI UCJV300 Series Operation Manual
Uv inkjet printer
Hide thumbs
Also See for UCJV300 Series:
- Operation manual (194 pages) ,
- Care and maintenance (36 pages) ,
- Manual (22 pages)
Table of Contents
Advertisement
• The driver installation guide is provided within the installer.
Installing RIP Software
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Install RasterLink.
• The following icon appears on the PC desktop once the software has been installed.
• For more information, refer to the RasterLink installation guide.
https://mimaki.com/download/software.html
• Once installed, activate the license for Rasterlink. Otherwise, "Profile Update" will not start.
Obtaining Color Profiles
Print quality (e.g., tone, bleeding) will vary depending on the media and ink set. To maintain consistent print
quality, select a color profile that suits the media and ink set.
The explanation here applies to MIMAKI RIP software (RasterLink).
1
Launch "Profile Update".
(1) From the Start menu, select [Mimaki RasterLink6Plus] > [Profile Update].
(2) Click [Next].
2
Select the UCJV300 Series, 150 Series being used.
• Select the check box for the ink set and ink type being used, then click [Next].
• Expanding the [+] button allows selection of the ink type.
Chapter 1 Before Using This Product
39
1
Advertisement
Table of Contents
