Advertisement
Channel Set-up
• To add a channel, press the
the
MINUS
button
• To change the false color of the channel, double click on the gradient rectangle
• Determine what wavelengths you need. Select the filter cube, which will be outlined in
red when active.
• Turn on the LED source. You may have to change the wavelength it is emitting at using
the dropdown below the slider. If it can't use that wavelength with that filter, the box will
be grayed out with a line through it.
Make sure that the wavelengths in these dropdown boxes are the same throughout all
the channels. This quickens the time it takes to take a photograph.
• Use the slider to increase/ decrease the light intensity
• Press the
LIVE
PLUS
button in the lower left-hand corner to view your subject
button in the middle window. To delete a channel press
6
Hide quick links:
Advertisement
