Table of Contents
Advertisement
A.3
Installing or Replacing SATA Drive
A.3.1 Drive and Tray Removal
A drive/ t ray assembly can be removed by pressing upwards on t he green lat ch f ound on t he
t ray and removing it wit h t he handle as shown in Figure A-15 and Figure A-16.
DSN-1100 Hardware Reference Guide
Removal of a populat ed drive/ t ray assembly can have unf oreseen ef f ect s
including t he loss of all dat a in a volume. A drive can be part of a volume
t hat may or may not be redundant . Bef ore removing a drive f rom an
operat ing xSt ack St orage Array, make sure it is t he correct one.
Figure A-15 Drive and Tray Removal
Figure A-16 Remove Drive/Tray
35
Advertisement
Table of Contents
Need help?
Do you have a question about the xStack Storage DSN-1100 and is the answer not in the manual?
Questions and answers