Specifications - Aiwa CA-DW235 Operating Instructions Manual

Specifications
Tuner section
Frequency range, antenna — FM: 87.5 -108.0 MHz Rod antenna,
AM: 530-1,710 kHz Ferrite bar antenna
Deck section
Track format — 4 tracks, 2 channels/ Frequency range — Normal tape:
50-12,000 Hz (EIAJ) / Flecording system — AC bias/ Erasing system
— Magnet erase/ Heads — Deck 1: Recording/playback head (1),
Erasure head (1); Deck 2: Playback head (1)
CD player section
Disc — Compact disc/ Scanning method — Non-contact optical scanner
(semiconductor laser) / Fiotation speed – Approx. 500-200 rpm/CLV /
Error correction — Cross interleave, Reed, Solomon code/ Number of
channels — 2 channels / D/A conversion — 1 bit DAC
General
Power requirements — DC 12 V using eight size D (R20) batteries, AC
120 V, 60 Hz/ Dimensions (W x H x D) — 260 x 302x 246 mm/ Weight
— 4.2 kg (excluding batteries)
Power output — 2.5 W + 2.5 W (7 ohms, EIAJ) / Power consumption —
18W
Accessory — AC cord (1)
Speaker
Type — 120 mm cone type/ Dimensions (W x H x D) — 205 x 302x 246
mm / Weight — Approx. 1,2 kg x 2
Impedance — 7 ohms/ Allowable max. input – 5.0 W
Specifications and external appearance are subject to change without
notice.
L -4
Please check the copyright laws relating to recordings from disc,
radio or external tape for the country In which the machine IS being
NOTE
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference
by one or more of the fc)llowing measures:
... Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
... Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Modifications or adjustments to this product, which are not expressly
approved by the manufacturer, may void the user's right or authority to
operate this product.
ENGLISH
9