Aiwa CA-DW235 Operating Instructions Manual page 4

FM
POWER/
O.STANDBY
REPEAT/
MODE/OSC
CD
B bill
PLAYI
PAUSE
SKIP/ w SKIPI
SEARCH SEARCH
STOPIMEMORY
1
2
3
Press CD.
The power is turned on and the CD button lights up.
Press PUSH OPEN to open the disc
compartment. Place a disc with the printed
side up and close the disc compartment.
Total number of tracks and total playing time are
displayed.
Press F/n
PLAY/PAUSE to start play.
The number of the track being played and elapsed
playing time are displayed.
STOP/MEMORY – Stops play.
/El PLAY/PAUSE – Pauses play. To resume play, press
again.
I++, FFI SKIP/SEARCH – Searches for a particular point
during playback. Keep M or W pressed and then
release it.
– Skips to the beginning of a track. Press K or M
repeatedly.
REPEAT/FM MODE/OSC
– Repeats a single track or all tracks. Select as follows.
C 1: A single track is played repeatedly.
Select a track with l++ or M.
G: All tracks are played repeatedly.
To start play when the power is off, press CD. The
power is turned on and play of the loaded disc begins
(Direct Play Function).
If
you load a disc while the CD button flashes in step 2,
play starts without pressing II 1.
After listening, press POWER/C!) STANDBY to turn the
power off.
NOTE
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones).
It may result in malfunctions.
Do not place more than one disc in the disc
compartment.
Do not try to open the disc compartment during play.
Do not touch the lens. Doing so may cause malfunctions,
Up to 30 tracks can be programmed from the disc.
~ In stop mode,
keep
STOP/MEMORY pressed
until "M" flashes in the display.
z Press l++ or M to select a track, then press
STOP/MEMORY to store it.
Track number
Programm~d number
3 Repeat step 2 to program other tracks.
4 Press E/n to start play.
To check the program, press H or M in stop mode.
To clear the program, press once in stop mode so that
"M" disappears in the display.
To change the programmed tracks, clear the program and
repeat all the steps again.
4
ENGLISH