Aiwa CA-DW235 Operating Instructions Manual page 6

Compact disc carry component system
Hide thumbs Also See for CA-DW235:
Table of Contents

Advertisement

Available languages

Available languages

DUBBING SPEED
II PAUSE
¤/~
sTop/EJEcT
REC
POWER/(!) STANDBY/TAPE,
RADIO, CD
Use Type I (normal) tapes only.
Note that recording is done on only one side of the tape.
Wind the tape to the point where recording starts.
~
Insert a tape to be recorded
on into deck 1
with the side to be recorded facing out.
Deck 1
@
z
Get ready to record from the source.
To
record from a
CD, press CD and load the disc.
To record from a radio broadcast,
press RADIO and
tune to a station.
3
Press
REC on deck 1 to start recording.
*
PLAY is pressed simultaneously,
When the selected function is CD, CD play and
recording starts simultaneously.
To record only the selected
tracks of a CD
1
Follow steps 1 to 3 of PROGRAMMED
PLAY on page 4
to program tracks.
2
Press
REC.
To stop recording,
press H/A
STOP/EJECT
on deck 1.
When recording from a CD, play pauses.
To stop CD play,
press
STOP/MEMORY.
To pause recording,
press 1I PAUSE.
To resume
recording,
press again.
To erase recording,
press
REC on deck 1 while the
power is off.
After recording,
press POWER/~
STANDBY to turn the
power off.
1
2
3
4
5
6
Press TAPE to turn the power off.
Insert a tape to be recorded
on into deck 1 with
the side to be recorded facing out.
Insert a tape to be played into deck 2 with the
side to be played facing out.
Press 1I PAUSE then press
REC on deck 1
to enter recording
pause mode.
The power is turned on.
-
PLAY is pressed simultaneously.
Press DUBBING
SPEED to select a dubbing
speed.
The HIGH SPEED DUB indicator lights up: Dubs at high
speed.
The HIGH SPEED DUB indicator disappears:
Dubs at
normal speed.
Press P PLAY on deck 2.
11 PAUSE on deck 1 is released and recording starts.
To stop recording,
press WA
on deck 1 and deck 2. The
power will be automatically
turned off.
NOTE
When recording near a television,
noise may be recorded.
Move the unit away from the television.
To prevent accidental
erasure, break off the plastic tabs on
the cassette tape with a screwdriver
or other pointed tool
after recording.
To record on the tape again, cover the tab openings with
adhesive tape, etc.
6
ENGLISH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents