SanRex SANARG 300AP Operator's Manual page 16

SOURCE OF
SYMBOL
Any Coatings on Base
Metal, Weld Process
Welding & Cutting
Welding or its Allied
Processes
HAZARD
Fumes and
Gases
Toxic Fumes,
Electric
Shock
Pneumatic,
Electrical,
Gases,
Liquid
HAZARD HOW TO AVOID
Keep your head out of the
fumes.
Do not breathe the fumes.
Use enough ventilation or
exhaust at the arc, or both, to
keep fumes and gases from your
breathing zone and general area
Be alert, aware, and focused on
the job and the work area; notice
any changing conditions.
Wear and use only the correct,
approved equipment for the
specific job; be sure it is
properly installed and used
Employers must develop a
written lockout/tagout program
and procedure.
Employees must be trained in
these procedures, as well as the
purpose and methods of
lockout/tagout.
16