SECTION 12: ABNORMAL
OPERATION
12.1 REVERSIONARY MODE
Reversionary Mode is a mode of operation in which all
important flight information is presented on at least one of
the remaining displays. Flight parameters are presented
in the same format as in normal mode.
Reversionary display mode is manually activated by:
1) PFD1 – By pressing the DISPLAY BACKUP
button on the left audio panel.
2) MFD – By pressing the DISPLAY BACKUP
button on the left or the right audio panel.
PFD1
190-00708-00 Rev. A
Normal Operation
Figure 12-1 G1000 Reversionary Mode: Failed PFD1
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
3) PFD2 – By pressing the DISPLAY BACKUP
button on the right audio panel.
12.2 ABNORMAL COM OPERATION
When a COM tuning failure is detected by the system,
the emergency frequency (121.500 MHz) is automatically
loaded into the active frequency field of the COM radio
for which the tuning failure was detected. In the event of
a dual display failure, the emergency frequency (121.500
MHz) automatically becomes the active frequency to the
pilot through the pilot headset.
MFD
SECTION 12 – ABNORMAL
OPERATION
PFD2
12-1