Scheduler; Entering A Scheduler Message - Garmin G1000 Cockpit Reference Manual

11.4 SCHEDULER

The Scheduler feature can be used to enter and display
reminder messages (e.g., Hot Section Inspection or Phase
1 Maintenance Check) in the Alerts Window on the PFD.
Messages can be set to display based on a specific date
and time (event), once the message timer reaches zero
(one-time; default setting), or recurrently whenever the
message timer reaches zero (periodic). Message timers
set to periodic alerting automatically reset to the original
timer value once the message is displayed. When power
is cycled, messages are retained until deleted, and message
timer countdown is restarted.

Entering a Scheduler Message

1)
Select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the
flashing cursor.
3) Turn the large FMS Knob to highlight the first
empty scheduler message naming field.
4) Use the FMS Knob to enter the message text to be
displayed in the Alerts Window and press the ENT
Key.
190-00708-00 Rev. A
Figure 11-19 Scheduler (Utility Page)
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
SECTION 11 – ADDITIONAL
5) Press the ENT Key again or use the large FMS Knob
to move the cursor to the field next to Type.
6) Turn the small FMS Knob to select the message
alert type:
• Event—Message issued at the specified date/
time
• One-time—Message issued when the message
timer reaches zero (default setting)
• Periodic—Message issued each time the message
timer reaches zero
7) Press the ENT Key again or use the large FMS Knob
to move the cursor to the next field.
8) For periodic and one-time message, use the FMS
Knob to enter the timer value (HH:MM:SS) from
which to countdown and press the ENT Key.
FEATURES
11-11