Summary of Contents for ORION TELESCOPES & BINOCULARS EZ Finder II
Page 1
INSTRUCTION MANUAL Orion EZ Finder II ™ Reflex Sight #7228 A N E M P L O Y E E - O W N E D C O M P A N Y Corporate Offices: 89 Hangar Way, Watsonville CA 95076 - USA Toll Free USA &...
Page 2
Then tighten the two thumbscrews to Telescope secure the bracket in the clamp. To install the EZ Finder II on most Orion tele- scopes, just slip the foot of the bracket into the dovetail base of the telescope, then tigh- Figure 1.
Page 3
The intensity of the dot is adjust- Battery compartment cover Azimuth adjustment Altitude knob adjusment knob Thumbscrews Bracket Figure 4. Familiarize yourself with the parts of the EZ Finder II.
Page 4
At the end of your observing session, be centered in the eyepiece and on the EZ sure to turn the power knob counterclock- Finder’s red dot, the EZ Finder II is properly wise until it clicks off. aligned with the telescope.
Need help?
Do you have a question about the EZ Finder II and is the answer not in the manual?
Questions and answers