Honeywell Notifier IDR-2P User Manual page 38

997-411-000-9, Issue 9
March 2008
IDR-2P, -2A & -6A Repeaters User Manual
RS232 Serial Port - Temporary PC connection
Baud rate:
Connector:
Max cable length:
RS232 Isolated Serial Port (Optional) - Notifier-approved Equipment
Isolation:
Baud rate:
Connector:
Max cable length:
Display and Indications:
Alphanumeric Display:
LED Indicators:
Controls
Pushbuttons - 2A (ID50): MUTE BUZZER, END DELAY/
Pushbuttons - 2A (other): MUTE BUZZER, ACCEPT, EVACUATE,
Pushbuttons - 6A:
Keypad - 2P/2A/6A
Buzzer
In order of decreasing priority:
Fire:
Pre-alarm:
Fault:
Fire (accepted):
Pre-alarm (accepted):
Fault (accepted)
Disablement
A1 - 2
9600 Baud
D-type on Control Board
5m
Functional at 42V
9600 Baud
Terminal block on RS232 Board
15m
IDR-2A & 2P use 2 x 40 character LCD
IDR-6A uses 64x240 pixel LCD
(arranged to give 6 lines of characters)
General FIRE and
DISABLEMENT, POWER, PRE-
ALARM, TEST, DELAY ACTIVE, SYSTEM
FAULT, and COMMUNICATIONS LOSS
EVACUATE, SILENCE/RESOUND,
RESET
SILENCE SOUNDERS, RESOUND
SOUNDERS, RESET
MUTE BUZZER, END DELAY/
EVACUATE, SILENCE/RESOUND,
CHANGE TABS, ZONES IN ALARM,
RESET
, , , and
Continuous pulses
3 pulses every 12 seconds
Continuous tone
3 pulses every 12 seconds
3 pulses every 12 seconds
1 pulse every 2 minutes
1 pulse every 2 minutes
FAULT,