Commissioning; Preliminary Checks - Honeywell Notifier IDR-2P User Manual

Only terminate the IDR
repeater power cables at
the fire control panel
after ALL preliminary
checks have been done.
Observe precautions for
handling Electrostatic
Sensitive Devices
997-411-000-9, Issue 9
March 2008
IDR-2P, -2A & -6A Repeaters User Manual
ATTENTION
16
3

Commissioning

This section gives the procedure for
commissioning the IDR repeater.
Commissioning consists of:
a. Preliminary checks.
b. Power-up checks.

3.1 Preliminary Checks

Carry out the following preliminary checks for
EVERY IDR repeater being commissioned,
prior to powering-up the system:
1 Check that all cables brought into the IDR
repeater have been terminated correctly.
The connection of external wiring is
described in Section 2.8.1. All power and
signal cabling and wiring must conform to
the appropriate local regulation.
2 Check that the address has been set
correctly as described in Section 2.8.2
(RS485 network) or Section 2.8.3 (ID
network).
2 net