Menus - General Information - Honeywell Notifier IDR-2P User Manual

997-411-000-9, Issue 9
March 2008
IDR-2P, -2A & -6A Repeaters User Manual

4.2 Menus - General Information

20
KEYPAD PUSHBUTTONS (IDR-2P, -2A, -6A)
Used to move around the LCD menus. On
ID50 repeaters only,
pushbutton.
Used to select repeater-specific menus (-2P,
-2A) and to select various menu options, as
defined on the menus (-2P, -2A, -6A).
LEDs (IDR-2P, -2A, -6A)
A fire condition exists.
A fault condition exists.
There is a disablement on the system (for
ID2000 panels, on the associated panel).
The dc power supply to the IDR repeater is
present and the IDR processor is operating.
A pre-alarm condition exists.
There is a test occurring on the system.
There is an active delay on the system.
The fire control panel has a system fault.
A network communications problem has
occurred and the IDR repeater information is
not reliable.
Spare.
Day Mode Indication (IDR-6A)
When the panel is in Day Mode the LCD
confirms this status with DAY MODE
at the bottom of the LCD and to the left of any
displayed tabs.
Press (-2A/-2P) or operate the keyswitch (-6A)
to enter the IDR repeater-unique menus system.
Access level 2 is required, except with the -2P
variant. Use the and pushbuttons to select
the desired menu. All these menus incorporate a
time-out; if no pushbuttons are operated within
the time-out period the IDR repeater reverts to
the display prior to the menu being accessed.
is the Cancel
displayed