Advertisement
3. Enable LAN DHCP - N o , although the LAN port likely won't be used, it is likely not
desirable to have the box provide DHCP services if connected to the network.
There are no settings on the Advanced Settings panel that must be changed.
3) Configure the FXS Port settings
Although the FXS port will not be used, there are several settings that must be changed.
1. Account Active - N o
2. Local SIP Port - 5 063 ( Or anything besides 5060, which will be used by the FXO port)
4) Configure the FXO Port settings
This is where the bulk of the configuration takes place. If these settings are not correct, the
default action is to forward calls to the FXS port on the box (in other words, when Ignition
attempts to make a call, you will see the FXS port status go to "Ringing" on the HT 8 13 status
page).
The HT813 expects to be connected to a SIP server. While Ignition is not a sip server, the box
can be configured to point to it, as it will not actually try to connect with the "SIP Registration"
option set to "No" (see below).
Advertisement
