Table of Contents
Advertisement
3.23 Camera module
Tools
•
Torque screwdriver, set to 10&15 Ncm ± 6 %. Bits NTZ 112 1052
•
Opening tool NTZ 112 302/2
•
Blunt pair of tweezers
•
Flex film assembly tool NTZ 112 521
Instruction
•
Disassemble the phone as described in 1 Disassembly Upper & Lower cabinets, step 12-25.
#
Figure
1
2
3
•
Assemble the phone as described in 2 Reassembly Upper & Lower cabinets, step 12-22.
3/000 21-1/FEA 209 544/80 C
Sony Ericsson Mobile Communications AB
Fig.3.36
Fig.3.37
Fig.3.38
Instruction
With a blunt pair of tweezers
gently "bend" the LCD frame
"snapholders" until all four
holders are free and loose.
(Fig.3.36)
Gently fold the main LCD to
the side, and then open the
FPC connector with the flex
film assembly tool NTZ 112
521.
Remove the old camera
module. (Fig.3.37)
Assemble the new camera
module in the opposite
direction. Use the flex film
assembly tool for the FPC
connector. (Fig.3.38)
Working Instruction, SP/Mechanical
Note
Be careful with the LCD.
For more information
regarding the main LCD
(See 3.16 Replacement of
Mechanical Parts).
Make sure that the gold
line on the flex film is in
line with the FPC
connector and that the
connector is properly
closed.
Be careful not to damage
the flex film with the flex
film assembly tool.
33(41)
Advertisement
Table of Contents
