Oil Maintenance Of The Internal Assembly - Shimano Nexus INTER 5E SG-C7000-5V Service Manual

„ Oil maintenance of the internal assembly
To maintain the product in good working order, it is recommended to have a bicycle dealer or
nearest agency carry out maintenance such as lubrication of the internal parts about once every
two years from the first time of use (once about every 5,000 km if the bicycle is used very
frequently). Also, for carrying out maintenance, the use of Shimano internal geared hub grease or
a lubrication kit is recommended. If Shimano grease or a Shimano lubrication kit is not used,
problems such as a malfunction in gear shifting may occur.
1
2
3
Click here for the latest Dealer's Manual
https://si.shimano.com/DM/CASG002
Dealer's Manual
(SG-C7000-5V / SG-C7000-5R / SG-C7000-5C / SG-C7000-5D)
(A)
Fill the container with maintenance oil
to a height of 95 mm.
(z)
(z)
Immerse the internal unit in the oil from
(z)
the left side until the oil reaches up to
ring gear unit 1, as shown in the
illustration.
(z)
Keep the internal unit immersed for
approximately 90 seconds.
95 mm
Ring gear unit 1
Return to index page
(A)
WB maintenance oil set
(Y00298010)
26