Maintenance; Disconnecting Shifting Cable When Removing Rear Wheel From The Frame - Shimano Nexus INTER 5E SG-C7000-5V Service Manual

MAINTENANCE

„ Disconnecting the shifting cable when removing the rear wheel from the frame
1
(A)
2
(A)
(B)
3
(E) (F)
(A)
4
(B)
5
Detach the wheel.
Click here for the latest Dealer's Manual
https://si.shimano.com/DM/CASG002
Dealer's Manual
(SG-C7000-5V / SG-C7000-5R / SG-C7000-5C / SG-C7000-5D)
(A)
(C)
(D)
(y)
(z)
Set SL-C7000-5 to 5.
Press the lever of the pulley clockwise to
loosen the inner cable. In the following
steps 3 and 4, continue to work in this
condition.
Remove the outer casing holder unit
from the outer casing holder of the
cassette joint (y).
Remove the inner cable from the slit in
the bracket (z). Be careful not to damage
the rubber bellows at this time (if rubber
bellows are attached).
Remove the inner cable fixing bolt unit
from the cassette joint pulley.
Return to index page
(A)
REVOSHIFT lever
(A)
Pulley lever
(A)
Inner cable
(B)
Rubber bellows
(C)
Outer casing holder
(D)
Outer casing holder unit
(E)
Bracket
(F)
Slit
(A)
Inner cable fixing bolt unit
(B)
Cassette joint pulley
NOTICE
If reinstalling the cable, refer to steps 9 to 11
in "Cassette joint end".
23